flat-roof-repairIf planning to do flat roof repair, you need to be very careful, if your roof is flat. Most people are using flat roofs for decoration purposes these days and now have become a favored choice for many residential homes. To maintain the roof properly following these steps can help you understand the steps needed:

One should start removing the damaged area and replace it with a new section. This practice would be ideal for small damaged areas of the roof. The dirt and gravel accumulated from the damaged section of the roof should be cleaned. The gravel should not be thrown away since it can be used for repairs later. The damaged area can be dissected and kept aside using a straight edged utility knife.

After that, one need to put some effort for cutting a rectangular section of the roofing material. The first layer of material needs to be cut followed by other layers that are damaged.

From an asphalt shingle or roll roofing, you can cut out a replacement section of roofing material. The section dissected always depend on the size of the section you removed for repair. One need to be careful since the replacement piece should approximately be of the same size. Now the cutout area can be coated with some plastic roofing repair cement. One must ensure that the cement is over the edges of the cutout section. After applying the coating, nail the patch after setting it properly in place. The patch should be placed around the perimeter of the section and need to be spaced approximately 2 inches apart for the purpose of repair.


Procedure to follow during Flat roof repairs:


When the cement starts to set, sweeping the gravel onto the top of the patch helps to keep it in place. One should be very careful during this process since harsh winds can blow the patch away.

One need to try locating leaks by examining the lower lying areas of the flat roof. This area is the most vulnerable since water can ponder here and can create damage. Soaking water with the help of all absorbent materials and cloths. After drying, look for blisters or a crack in the roof. You can use a knife to open the blister that you had located. When following this process, one need to very careful using the knife. Since it can go deep and will cause more damage. Always let area become dry after draining the water from inside the blister. In the end, seal it tightly with roof cement to complete the flat roof repair.

Since doing flat roof repair is not an easy task, so asking a professional or a reliable company is always recommended. If you are looking for a reliable company who can provide you a team of experts to fix your roof. Type,Flat Roof Repair Loveland CO and you will find Kool Kote Roofing as the most reliable source available in the market.





Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s